iC Home > Know-how >
Other Stuff (etc.) > ADSL Router ZyXEL Prestige 660HW-63
Know-how5.1 ADSL Router ZyXEL Prestige 660HW-63 |
11.05.2008 | |
| ← 5 Other Stuff (etc.) | [ up ] - [ Know-how A - Z ] - [ top ] | 5.2 Deutsche Grammatik → |
iC Home > Know-how >
Other Stuff (etc.) > ADSL Router ZyXEL Prestige 660HW-63
Know-how5.1 ADSL Router ZyXEL Prestige 660HW-63 |
11.05.2008 | |
| ← 5 Other Stuff (etc.) | [ up ] - [ Know-how A - Z ] - [ top ] | 5.2 Deutsche Grammatik → |
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name of your
firmware upgrade file on your workstation and "ras" is the remote file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP client program. For details on uploading system firmware using TFTP (note that you must remain on this menu to upload system firmware using TFTP), please see your manual.
Firmware Upgrade Steps
Ich habe die aktuellere Firmware (340SS4D0.bin) von zyxel.ch herunter geladen und per ftp 192.168.1.1 transferiert. Nach der Einspielung des Updates erscheint jedoch unverändert immer noch die Version SS.3 statt SS.4! Fehlt evtl. noch eine Schritt in meiner Durchführung?
C:\>ftp 192.168.1.1 Verbindung mit 192.168.1.1 wurde hergestellt. 220 FTP version 1.0 ready at Sat Apr 01 13:10:16 2006 Benutzer (192.168.1.1:(none)): root 331 Enter PASS command Kennwort:******** 230 Logged in ftp> lcd C:\hersi_pu\softw\zyxel\extracted Lokales Verzeichnis jetzt C:\hersi_pu\softw\zyxel\extracted ftp> dir 200 Port command okay 150 Opening data connection for LIST --w--w--w- 1 owner group 1884194 Jul 01 12:00 ras -rw-rw-rw- 1 owner group 49152 Jul 01 12:00 rom-0 ´´´´226 File sent OK FTP: 64d Bytes empfangen in 0.00Sekunden 135000.00KB/s ftp> get rom-0 200 Port command okay 150 Opening data connection for RETR rom-0 226 File sent OK FTP: 64d Bytes empfangen in 0.27Sekunden 185.48KB/s ftp> put 340SS4D0.bin ras 200 Port command okay 150 Opening data connection for STOR ras Verbindung beendet durch Remotehost. ftp> quit
After Upgrade
System Name:
ZyNOS F/W Version: V3.40(SS.3) | 06/02/2005
DSL FW Version:TI AR7 01.01.09.00
Standard:ADSL_G.dmt
See also:
copyright by reto - created with mytexi